View PD104SL7_1039285.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD104SL7
Version 1.1
FOR MORE INFORMATION:
Http://www.AZDISPLAYS.com
AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1
PD104SL7
TECHNICAL SPECIFICATION CONTENTS
NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 -
ITEM
Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input Terminals Absolute Maximum Ratings Electrical Characteristics Power On Sequence Optical Characteristics Handling Cautions Reliability Test Block Diagram Packing Revision History
PAGE
1 2 3 3 3 4 5 7 7 13 14 17 18 19 20 21
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2
PD104SL7
1.Application
This data sheet applies to a color TFT LCD module, PD104SL7. PD104SL7 module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. This module is not designed for aerospace, avionics, medical, F/A, transportation, car or any other products, which require extreme level of reliability. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet.
2. Features
. Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors 262,144 colors . Optimum Viewing Direction 6 o'clock . 3.3V LVDS interface standard: THC63LVDF64A as receiver . +3.3V DC supply voltage for TFT LCD panel driving . Backlight driving DC/AC inverter not included in this module .Long Life Lamp
3.Mechanical Specifications
Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 26.4(diagonal) 10.4 (diagonal) 800 (R, G, B) 600 262,144 211.2(H) 158.4 (V) 0.264 (H) 0.264 (V) Stripe 238.6 (w) 171.0(H) 6.0(typ.) (D) 310(typ.),320(max.) Single CCFL, side-light type Anti-glare Normally white Unit cm inch dot mm mm mm g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3
PD104SL7
4. Mechanical Drawing of TFT-LCD Module
ACTIVE AREA) POLARIZER) BEZEL OPENING)
Unit: mm
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4
ACTIVE AREA) POLARIZER)
BEZEL OPENIBG)
TYP
PD104SL7
5. Input Terminals
5-1) TFT-LCD Panel Driving Connector type: Molex 53779-1470 Pin No. Symbol Function 1 VDD Power supply : +3.3V 2 VDD Power supply : +3.3V 3 GND 4 GND 5 IN0Pixel data Transmission pair 0 (negative -) 6 IN0+ Pixel data Transmission pair 0 (positive +) 7 IN1Pixel data Transmission pair 1 (negative -) 8 IN1+ Pixel data Transmission pair 1 (positive +) 9 IN2Pixel data Transmission pair 2 (negative -) 10 IN2+ Pixel data Transmission pair 2 (positive +) 11 CLKSampling Clock (negative -) 12 CLK+ Sampling Clock (positive +) 13 GND 14 GND
Remark
Recommended Transmitter (THC63LVDM63A Thine) to PD104SL7 interface Assignment: To PD104SL7 Input terminal of Output signal Graphic controller output signal interface THC63LVDM63A symbol terminal(Symbol) Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data Tout0No.5 : IN0TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data Tout0+ No.6 : IN0+ TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data Tout1No.7 : IN1TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) Tout1+ No.8 : IN1+ TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data Tout2No.9 : IN2TIN17 20 B5 Blue pixel data(MSB) TIN18 22 NC No connection Tout2+ N0.10 : IN2+ TIN19 23 NC No connection TIN20 25 ENAB Compound Synchronization signal CLK in 26 NCLK Data sampling clock TCLK outNo.11 : CLK INTCLK out+ No.12 : CLK IN+
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5
PD104SL7
Data stream of IN0-/+, IN1-/+ and IN2-/+ for PD104SL7
IN0 RxOUT6 RxOUT5 RxOUT4 RxOUT3 RxOUT2 RxOUT1
G0 R5 R4 R3 R2 R1
RxOUT0 R0 RxOUT7 G1 RxOUT7 B2
IN1 RxOUT13 RxOUT12 RxOUT11 RxOUT10 RxOUT9 RxOUT8
B1 B0 G5 G4 G3 G2
IN2 RxOUT13 RxOUT12 RxOUT11 RxOUT10 RxOUT9 RxOUT8
ENAB NC NC B5 B4 B3
LVDS Interface Block Diagram
R0~R5 G0~G5 B0~B5 NC NC ENAB CLK IN
TIN0~TIN5 TIN6~TIN11 TIN12~TIN17 TIN18 TIN19 TIN20 TCLK IN
5-2) Backlight driving Connector type : "BHSR-02VS-1" of Japan Solderless Terminal MFG Co. LTD PIN NO. Symbol Description Remark 1 VL1 Input Voltage(High) 2 VL2 Input Voltage(Low)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6
Graphic Controller Circuit
IN0IN0+ IN1IN1+ IN2IN2+ CLK-
RxOUT0~RxOUT5
LVDS to TTL parallel
PLL
THC63LVDM63A
TTL parallel to LVDS
LCD Internal Circuit
RxOUT6~RxOUT11 RxOUT12~RxOUT17
RxOUT18 RxOUT19 RxOUT20
CLK+
PLL
THC63LVDF64A
CLK OUT
Customer system side
PD104SL7 module side
PD104SL7
6. Absolute Maximum Ratings:
Parameters Supply Voltage Input Signals Voltage Backlight Driving Voltage Backlight Driving Frequency Note 6-1: LVDS signal . Symbol VDD VIN VL FL MIN. -0.3 -0.3 0 MAX. +4.0 VDD+0.3 2000 100 GND=0V, Ta=25 Unit Remark V V Note 6-1 V KHz
7. Electrical Characteristics
7-1) Recommended Operating Conditions: Item Symbol Supply Voltage VDD Current Dissipation IDD LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Lamp Current Lamp Voltage Starting Voltage (25 ) (Reference Value) Starting Voltage (0 ) (Reference Value) Lamp Driving Frequency Total power consumption (at IFL=5mA) IFL VL Vs Vs FL Min. 3.0 -100 3.0 477 45 -Typ. 3.3 350 5.0 530 Max. 3.6 450 100 7.0 583 GND = 0V Ta = 25 Unit Remark V mA Note 7-1 mV Note 7-2 5mA : 230 cd/m2 Note 7-3 Note 7-6 IFL=5mA Vrms Note 7-3 mA Vrms Vrms KHz W Note 7-5 Note 7-4
60 3.6
1110 1450
80 -
Note 7-1 : To test the current dissipation of VDD, using the "color bars" testing pattern shown as below
1
2
3
4
5
6
7
8
1. 2. 3. 4. 5. 6. 7. 8.
White Yellow Cyan Green Magenta Red Blue Black
Idd current dissipation testing pattern
Note 7-2 :Please refers to THC63LVDF64A specification by Thine Corporation. This LCD module conforms to LVDS standard. Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible. In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7
PD104SL7
Note 7-4 : The" Max of starting voltage " means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. Note 7-5 : Not including the efficiency of backlight DC/AC inverter Note 7-6 : Lamp current is measured with current meter for high frequency as shown below
TFT-LCD Module
1 2 ~ A
Inverter
* Pin 2 is Vlow ** Current meter : Yokogawa 2016-01
Lamp current dissipation testing configuration 7-2) Input / Output signal timing chart (A) Vertical Timing
t1 t2 CLK t3 ENAB
R5~R0 G5~G0 B5~B0
t3
X,1
X,2
X,3
X,4
X,Y X,598 X,599 X,600
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8
PD104SL7
(B) Horizontal Timing
tc
CLK ENAB
t3 t4
797,Y
799,Y
R5~R0 G5~G0 B5~B0
1,Y 2,Y 3,Y 4,Y 5,Y 6,Y 7,Y
X,Y 798,Y 800,Y
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9
PD104SL7
C) Timing Specifications Item Frame Cycling Vertical Display Period Horizontal Scanning Time Horizontal Display Period Clock Cycle Clock High Level Time Clock Low Level Time Hold time Set-up time Symbol t1 t2 t3 t4 t5 t6 t7 t8 t9 9.0 9.0 4.0 5.0 Min. 604 X t3 600 X t3 920 X t5 Typ. 628X t3 16.58 600 X t3 26.4 800 X t5 25.0 Max. 800 X t3 600 X t3 ns ns ns ns ns Unit Remark ms s
1056 X t5 1064 X t5
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10
PD104SL7
7-3) Display Color and Gray Scale Reference Input Color Data Green 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
Color Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker Green Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker Blue Brighter Blue (61) Blue (62) Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0
Red 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0
Blue 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic Colors
Red 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 1 1 0 0 0
1 0 1 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 1
0 0 0 0 1 0
000000000000111101 000000000000111110 000000000000111111
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11
PD104SL7
7-4) Pixel Arrangement The LCD module pixel arrangement is the stripe.
R G B R G B R G B 1 st Line R G B R G B 2 nd Line R G B 3 rd Line 1 st Pixel 1 Pixel = R G B
RGB RGB RGB 800 th Pixel
RGB
598 th Line 599 th Line 600 th Line
RGB RGB RGB
RGBRGB
RGBRGBRGB
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12
PD104SL7
8 .Power On Sequence
3.0 V
0 s< t <35 m s
0 s< t <35 m s
3.0 V
Signal
B acklight
1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (ENAB,CLK, Data) low level or high impedance
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13
PD104SL7
9. Optical Characteristics
9-1) Specification: Parameter Symbol Horizontal (to 12 Viewing Angle o'clock) Vertical (to 6 o'clock) Contrast Ratio Response time Luminance Luminance Uniformity White Chromaticity Lamp Life Time Cross Talk Ratio Rise Fall CR Tr Tf L U x y CTK Condition MIN. 40 10 35 Optimum direction =0 =0 =0/ =0 200 200 TYP. 45 15 40 400 15 25 230 MAX. 50 50 0.35 0.38 3.5 Unit deg deg deg ms ms cd/ % hr % Note 9-2 Note 9-4 IFL=5mA, Note 9-3 Note 9-5 Ta = 25 Remarks Note 9-1
CR10
70 80 0.29 0.32 0.32 0.35 20000 -
IFL=5mA Note 9-6
All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure.
Photometer (TOPCON BM-5A or BM-7 fast)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14
500 mm +/- 50 mm
Field = 1 TFT-LCD module
DC/AC Inverter Optical characteristics measuring configuration
PD104SL7
Note 9-1 The definitions of viewing angles are as follows.
Lamp connector
12 o'clock
3 o'clock
9 o'clock
Note 9-2 : The definition of contrast ratio Note 9-3
6 o'clock
=
The typical luminance value is measured at lamp current 5.0 mA. The max luminance value is measured at lamp current 7.0 mA.
Note 9-4: Definition of Response Time Tr and Tf:
White 100% 90% Brightness 10% 0% Tr Tf Black White
Note 9-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15
PD104SL7
The test pattern is white (Gray Level 63).
25%
50%
75%
25%
50%
75%
Note 9-6: Cross Talk (CTK) =
YA-YB YA
100%
YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module
Pattern A (Gray Level 31) YA 1/3 1/3 1/3 1/3
Pattern B (Gray Level 31, central black box exclusive) YB
1/3
1/3 Black (Gray Level 0)
: Measuring Point (A and B are at the same point.)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16
PD104SL7
10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17
PD104SL7
11. Reliability Test
No 1 2 3 4 5 6 Test Item Ta = +70 Ta = -20 Ta =+60 Ta = 0 Test , 240 hrs , 240 hrs , 240 hrs , 240 hrs , 80%RH, 240 hrs , 100 Cycles 0.15 mm Condition Remark High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test Operation Test Thermal Cycling Test (non-operating)
High Temperature & High Humidity Ta = +60 0
(No Condensation) +60 1Hr 1Hr Frequency 10 ~ 57 HZ , Amplitude 58~500Hz, 1G Sweep time: 11 min Y, Z) 80G, 6ms, X,Y, Z 1 times for each direction C=150pF,R=330 Contact=8KV Air=15KV 10 times/terminal
7
Vibration Test (non-operating)
Test Period: 3 hrs (1 hr for each direction of X,
8
Shock Test (non-operating) Electron Static Discharge
9
Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] 1. Main LCD should normally work under the normally condition no defect of function,screen quality and appearance (including : mura ,line defect ,no image) 2. After the temperature and humidity test, the luminance and CR (Contrast ratio) ,should not be lower than minimum of specification. 3. After the vibration and shock test , can't be found chip broken.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18
PD104SL7
12.Block Diagram
VL1
B a c k -lig h t(L a m p 1 )
VL2
1
ENAB
2 3
ENAB C LK IN 0 -/+
CLK
LVDS Interface (THC63LVDF64A)
Control Circuit
R0 R1 R5 G0 G 11
Gate Driver
... ...
T F T -L C D D is p la y A re a
IN 1 -/+
G5 B0 B1
598 599 600 123 4 2400
...
IN 2 -/+
B5
VDD
Pow er M o d u le
S o u rc e D riv e r
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19
PD104SL7
13.Packing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20
PD104SL7 Revision History
Rev. 0.1 1.0 1.1 Issued Date Revised Content Oct.19,2005 Dec.6.2005 New Modify Feb.14,2006 Page14: 9. Optical Characteristics 9-1) Specification Life time from 15000(hr) change to 20000(hr)(Min)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21

▲Up To Search▲

Price & Availability of PD104SL7

	To Download PD104SL7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .